VALVOLINE gear oil 75W-90 LS HD Axle

APIs:

GL-5

Valvoline 75W-90 gear oil

Fully synthetic multi-vehicle gear oil.

Lightweight EP gear oil suitable for transmissions and transaxle units where the manufacturer specifies a GL-4 lubricant with SAE 75W-90 viscosity grade.

Valvoline Gear Oil 75W-90 provides excellent protection and perfect lubrication of the gearbox in a wide temperature range

Superior wear protection, even under heavy use. Advanced additives protect against corrosion, oxidation, foaming and deposits.

Synthetic base oils and a highly balanced additive system prevent breakdowns even after long use

Excellent viscosity-temperature properties even at very low temperatures. Highly stable viscosity with long-lasting multi-grade benefits

Better lubrication contributes to better fuel efficiency

Better oil circulation provides better cooling and therefore fuel savings

Suitable for manual transmissions and transaxle units of passenger cars, vans, trucks and buses where the manufacturer specifies a GL-4 transmission fluid with SAE 75W-90 viscosity grade

Applicable in very cold conditions

Specifications:

API: GL-4

Manufacturer's recommendation:

Lance

Ford

Chevrolet

Opel

Saab

Hyundai

KIA

Mazda

Mitsubishi

Nissan

Suzuki

Land Rover

Jaguar

Toyota

Container type: Canister

Contents: 20 litres

Fully synthetic multi-vehicle gear oil.

Lightweight EP gear oil suitable for transmissions and transaxle units where the manufacturer specifies a GL-4 lubricant with SAE 75W-90 viscosity grade.

Valvoline Gear Oil 75W-90 provides excellent protection and perfect lubrication of the gearbox over a wide temperature range.

Superior wear protection, even under heavy loads

Advanced additives protect against corrosion, oxidation,

development of foam and deposits.

Synthetic base oils and a highly balanced additive system

additive system prevent failures even after a long time

use

Excellent viscosity and temperature characteristics

even at very low temperatures. Highly stable viscosity

highly stable viscosity with long-lasting multi-grade benefits

Better lubrication helps improve fuel efficiency

Better oil circulation ensures better cooling and therefore fuel savings

Suitable for manual transmissions and transaxle units of passenger cars, vans, trucks and buses where the manufacturer specifies a GL-4 gear oil with SAE viscosity grade

and buses where the manufacturer specifies a GL-4 gear oil with SAE 75W-90 viscosity grade

Applicable in intense cold conditions

Specifications:

Valvoline also recommends this transmission fluid for use in vehicles where the following specifications are required:

API: GL-4

Lance

Ford

Chevrolet

Opel

Saab

Hyundai

KIA

Semi-synthetic premium transmission oil for passenger cars and other vehicles.

EP gear oil for differentials and transmissions for which manufacturers specify a GL-5 oil.

Valvoline Axle Oil 75W-90 provides excellent protection and lubrication of the differential and transaxle unit over a wide temperature range.

Superior wear protection, even under heavy loads

Unique additives protect against corrosion, oxidation, foaming and deposits.

The semi-synthetic base oils and the highly balanced additive system prevent breakdowns even after long use

Excellent viscosity-temperature properties even at very low temperatures. Highly stable viscosity with long-lasting multi-grade benefits

Better lubrication helps improve fuel efficiency. Better oil circulation ensures better cooling and therefore greater fuel economy.

Designed for limited-slip differentials and transaxle units in passenger cars, vans, and other vehicles where the manufacturer specifies a GL-5 transmission fluid with SAE 75W-90 viscosity grade

Specially formulated for the lubrication of hypoid transmissions operating at low and high speeds and with heavy or shock loads

Suitable for high-speed driving or long-distance travel

Specifications:

API GL-5

Container type: Can

Contents: 1 litre

Low consumption semi-synthetic oil for latest generation manual transmissions and hypoid gears - without limited slip. The very low cold viscosity ensures optimal gear lubrication even at extremely low temperatures. Increasingly used by vehicle manufacturers for comfortable shifting and to reduce fuel consumption.

SPECIFICATIONS / STANDARDS:

STANDARD: SAE 75W-80

API GL 4 and GL 5

SPECIAL BENEFITS:

- The very high pressure absorption capacity ensures optimal lubrication of the gearbox even at higher temperatures.

- Solves shifting problems at low temperatures.

- Reduces friction and prevents wear.

- Prevents corrosion and does not foam.

PROPERTY:

viscosity SAE J 306 75W-80

density at 20°C ASTM D 1298 0.878

viscosity at 40°C ASTM D 445 58.8 mm²/s

viscosity at 100°C ASTM D 445 10.1 mm²/s

Viscosity index ASTM D 2270 160

pour point ASTM D 97 -36°C

Flash point ASTM D 92 204°C

Low consumption semi-synthetic oil for latest generation manual transmissions and hypoid gears - without limited slip. The very low cold viscosity ensures optimal gear lubrication even at extremely low temperatures. Increasingly used by vehicle manufacturers for comfortable shifting and to reduce fuel consumption.

SPECIFICATIONS / STANDARDS:

STANDARD: SAE 75W-80

API GL 4 and GL 5

SPECIAL BENEFITS:

- The very high pressure absorption capacity ensures optimal lubrication of the gearbox even at higher temperatures.

- Solves shifting problems at low temperatures.

- Reduces friction and prevents wear.

- Prevents corrosion and does not foam.

PROPERTY:

viscosity SAE J 306 75W-80

density at 20°C ASTM D 1298 0.878

viscosity at 40°C ASTM D 445 58.8 mm²/s

viscosity at 100°C ASTM D 445 10.1 mm²/s

Viscosity index ASTM D 2270 160

pour point ASTM D 97 -36°C

Flash point ASTM D 92 204°C

Fully synthetic transmission oil with low viscosity when cold for outstanding fuel efficiency.

Specifically adapted to the wear protection and cold shifting requirements of modern passenger car manual transmissions.

Reduced cold viscosity for extraordinary fuel efficiency

Degree of rationalization for modern manual car transmissions according to the manufacturer's specifications

Excellent protection against wear and corrosion

Stability at high temperatures and oxidation thanks to fully synthetic base oils and special additives

Exceptional shear stability - "stay-in-grade"

Stable lubricating film even with very hot oil and very high loads, resulting in reduced wear and noise of the transmission

Excellent low temperature viscosity ensures better handling, rapid oil penetration and low "cold wear".

Miscible and compatible with conventional and synthetic branded gear oils To take full advantage of the product benefits HIGHTEC TOPGEAR SAE 75W- 80 S

However, it is recommended to carry out a complete change of the gearbox oil

ATTENTION:

JMC 75W-80 Extra transmission fluid is not suitable for use in automatic transmissions, DCT/DSG (dual clutch wet clutches) or CVT (continuously variable transmission).

automatic).

Use in DSG DQ200 transmissions is possible.

Specifications:

API GL-4

Manufacturer's recommendations:

BMW 83 22 0 309 031

BMW 83 22 0 403 247

BMW 83 22 2 339 219

BMW 83 22 7 533 818

BMW 2300 1434 404

BMW 2300 7533 513

BMW 2300 7533 818

FORD WSS-M2C200-C3

OPEL 19 40 182

OPEL 19 40 757

OPEL 19 40 768

OPEL 19 40 776

VOLVO 97308

VW 501 50

VW G 005 000 05

VW G 005 000

VW G 005 000 20

VW G 052 911 A1

VW G 052 911 A2

Multigrade semi-synthetic gear oil of performance class GL5 for manual transmissions and rear axles of cars, trucks, buses and off-road vehicles.

Property:

Particularly suitable for the new generation of manual transmissions and 5 and 6 speed axles with and without limited slip differential.

Offers excellent "limited slip" (LS) properties

High thermal load capacity

Excellent wear protection

High oxidation stability

Good compatibility with non-ferrous metals and sealing materials

High shear stability Optimized for all-season use

Miscible with commercially available gear oils

Specifications and Approvals:

API GL-4

API GL-5

API GL-5 LS

MIL L-2105 D

 Fields of application:

Ideal as a rationalization product also for the new generation of 5 and 6 speed manual transmissions and axle transmissions with and without limited slip differential.

Particularly suitable when "limited slip" (LS) properties are required.

Universal applicability in:

- Hypoid axis transmissions

- Manual transmissions

- Planetary gearboxes

- Lateral transmissions

- power take-offs

- Steering gearboxes

High pressure transmission oil for high load manual, auxiliary, transaxle and hypoid transmissions.

Property:

High protection against rust and corrosion

Good high pressure properties

Ensures easy movement

Wide viscosity range

Excellent wear protection

Excellent oxidation stability

High shear stability

Excellent viscosity-temperature behavior

High pressure absorption capacity

Prevents foaming

Neutral towards metal and sealing materials

Excellent operating characteristics

Reduced wear and running noise

Excellent cold flow behavior

Excellent smoothness even at low temperatures

I use it all year round

Specifications and Approvals:

API GL4

API GL5

MIL L-2105 C/D

MAN 341 type Z2

MAN 342 type M2

ZF TE-ML 05A

ZF TE-ML 07A

ZF TE-ML 12E

ZF TE-ML 16B/C

ZF TE-ML 17B

ZF TE-ML 19B

Application areas:

For high load manual transmissions; in particular axle transmissions with hypoid gears according to API GL 5

High performance, fully synthetic multigrade gear oil for multifunctional use in manual transmissions and new generation axle drives (cars, trucks, agricultural, construction and work machinery)

Optimal wear protection for easy switching at low temperatures

Excellent protection against corrosion

Stability at high temperatures and oxidation thanks to fully synthetic base oils and special additives

Stable lubricating film even with very hot oil and very high loads

Favorable low temperature viscosity for better switching, rapid oil penetration and low cold wear

Extremely shear stable - "Stay-in-Grade"

Fuel efficient!

Miscible and compatible with conventional and other synthetic gear oils. However, to take full advantage of the product, a complete gear oil change is recommended

ATTENTION:

Not suitable for use in multi-stage machines, DCT/DSG (dual clutch) or CVT (continuously variable automatic) transmissions

Manufacturer Approvals

API GL-4 / GL-5 / MT-1

MIL L-2105D / MIL PRF-2105E

SAE J2360

MAN 341 Type E3

MAN 3343 Type S

MB 235.8

SCANIA STO 1-0

ZF TE-ML 02B, 05B, 07A, 08, 12B, 12E, 16F, 17B, 19C, 21B

Manufacturer's recommendations:

Ford SQM-2C-9002 AA / M2C200-C

GM1940182 / 1940768 / M75 / 1

MAN 341 Type Z2 / 342 Type M2

MB 235.0 / 235.72

MF 1134

W G 50/51 (VW501 50/51) / G 052 190 / G 052911

ZF TE-ML 05A, 12E, 16B, 19B, 21A

Multigrade semi-synthetic transmission oil of performance class GL5 for manual transmissions and rear axles of passenger cars, trucks, buses and off-road vehicles.

Property:

Particularly suitable for the new generation of 5 and 6-speed manual transmissions and for axles with and without limited slip differential.

Offers excellent "limited slip" (LS) properties

High thermal load capacity

Exceptional wear protection

High oxidation stability

Good compatibility with non-ferrous metals and sealing materials

High shear stability Optimized for year-round use

Miscible with commercially available gear oils

Fields of application:

Ideal as a rationalization product, also for the new generation of 5 and 6 speed manual transmissions and axle transmissions with and without limited slip differential.

Particularly suitable when "limited slip" (LS) properties are required

Universal usability in:

Hypoid axis transmissions

Manual transmissions

Planetary gearboxes

Lateral transmissions

Power take-offs

Steering gears

Specifications:

API GL-4/-5/-5 incl. LS

Manufacturer's recommendations:

FORD WSS-M2C200-C/C2

VW G50/G51

High performance, fully synthetic multigrade gear oil for multifunctional use in manual transmissions and latest generation axle drives (cars, trucks, agricultural, construction and work machinery).

Optimal wear protection to facilitate changing at low temperatures

Excellent corrosion protection

High temperature and oxidation stability thanks to fully synthetic base oils and special additives

Stable lubricating film even with very hot oil and very high loads

Favorable low temperature viscosity for improved handling, rapid oil penetration and low temperature wear

Extremely shear stable - "stay-in-grade"

Save fuel!

Miscible and compatible with conventional gear oils and other synthetic oils. However, to take full advantage of the benefits of the product, it is recommended to carry out a complete change of the gear oil.

ATTENTION:

Not suitable for use in continuously variable transmissions, DCT / DSG (dual clutch) or CVT (continuously variable automatic) transmissions.

Specifications:

API GL-4 / GL-5

Manufacturer's recommendations:

EvoBus 26.000-032

EvoBus 26.000-037

MAN 341 TYPE E3/Z2

MAN 342 TYPE M3

MAN M 3343 TYPE S

JOHN DEERE JDM J11E/G

SCANIA STO 1:0

ZF TE-ML 05A

ZF TE-ML 05B

ZF TE-ML 07

ZF TE-ML 12L

ZF TE-ML 12N

ZF TE-ML 16F

ZF TE-ML 17B

ZF TE-ML 19C

ZF TE-ML 21A (ZF000642)

ZF TE-ML 21B