.

Active filters
Suitable for power steering and level control systems in cars and trucks, where special OEM fluids are recommended.
It flows easily at very high and low temperatures. Suitable for ABS/ASR/ASC braking systems
Manufacturer's recommendations:
Audi
Daimler Chrysler 345.0
MAN 3289
Opel B 040 0070
Porsche
Saab*
SEAT
Skoda
Volvo 1161529
VW TL 52146
High quality centralized hydraulic oil based mainly on synthetic hydrocarbons
It contains a highly effective combination of active ingredients and is characterized in particular by very good wear protection against the components of a central hydraulic system, with a very low friction level at the same time
Tips for use:
MB 344.0
MB OE no. 001989 20 03 (for comparison purposes only)
Technical specifications:
Viscosity at 40°C: 28.8 mm²/s
Viscosity at 100°C: 6.2 mm²/s
Density at 15°C: 0.850 g/cm³
Shear stability KRL 20 h 5 kn: -10%
Flash point: 200°
Container type: screw cap
Contents: 1 litre
Manufacturer approved:
BMW MTF LT-3, Ford WSS-M2C 186-A, Ford WSS-M2C 200-D2,
GM 1940004/19259104 (BOT 303), GM 1940764,
VW G 052 171 / VW G 052 178 / VW G 052 512 / VW G 052 527 A2
VW G 052 726 / VW G 055 726 / VW G 060 726 / VW G 070 726 A2
API Specifications:
GL-4, synthetic GL-4, GL-3
Synthetic GL-3
Vehicle type Cross-gear oil
EP light gear oil suitable for transmission and transaxle units where the manufacturer specifies an oil after GL-4 with SAE 75W-80
Valvoline Gear Oil 75W-80 provides excellent protection and perfect lubrication of the transmission over a wide temperature range
Optimal protection against wear, even under high stress
modern additives protection against corrosion,
Oxidation, foam, and debris.
Modern base oils and highly balanced
Additive system avoid failures
Good viscosity-temperature properties
very stable viscosity, even at low temperatures
Thanks to the uniform lubrication, the product varies slightly to reduce consumption characteristics.
The easy oil circulation ensures better cooling and therefore also for lighter fuel savings
Suitable for manual transmissions of cars, vans and other vehicles for which the manufacturer prescribes a GL-4 gear oil SAE 75W-80
Manufacturer recommendations:
API GL4
Packaging: Box
Contents: 1 litre
Vehicle type Cross-gear oil
EP light gear oil suitable for transmission and transaxle units where the manufacturer specifies an oil after GL-4 with SAE 75W-80
Valvoline Gear Oil 75W-80 provides excellent protection and perfect lubrication of the transmission over a wide temperature range
Optimal protection against wear, even under high stress
modern additives protection against corrosion,
Oxidation, foam, and debris.
Modern base oils and highly balanced
Additive system avoid failures
Good viscosity-temperature properties
very stable viscosity, even at low temperatures
Thanks to the uniform lubrication, the product varies slightly to reduce consumption characteristics.
The easy oil circulation ensures better cooling and therefore also for lighter fuel savings
Suitable for manual transmissions of cars, vans and other vehicles for which the manufacturer prescribes a GL-4 gear oil SAE 75W-80
Manufacturer recommendations:
API GL4
Packaging: Box
Contents: 1 litre
Characteristics:
Brown color
SAE viscosity class: 75W-85 GL-5
Volume: 1 litre
OE-Vergleich:
passend für folgende Manufacturer:
Audi: G 052 145 S2, G 052 190 A2, G 055 190 A2, G 052 145 A1
BMW: 83 22 2 295 532 S1
Mercedes-Benz: 001 989 17 03 10, 001 989 17 03, 001 989 33 03, 001 989 88 03
Volkswagen: G 052 145 A1 S1, G 052 190 A2, G 052 513 A2, G 055 190 A2
Gebrauchsnummer:
BMW Hypoid axle oil G1, MB 235.7, -, MB 235.74, MB 239.71, MB 239.72, ZF TE-ML 18
Fully synthetic premium gear oil for passenger cars and light commercial vehicles
For use throughout the powertrain when the manufacturer specifies a GL-4 or GL-5 oil
With integrated drain tap
specifications:
API: GL-4; GL-5; MT-1
Manufacturer's recommendation:
BMW MTF LT-4
Dexron MTF 75W-90
Fiat 9.5550-MZ4
Ford M2C-201-A
Ford M2C200-B, C
Ford N052145 VX00
GM 89021807
MB 235.72
MB 235.8
Porsche 999.917.067.00
SAAB MTF 0063
Volvo 97309
VW 501.50
VW G 50
VW G 052 145
VW G 052 911
ZF TE-ML 02B, 07A
Valvoline 75W-90 gear oil
Fully synthetic multi-vehicle gear oil.
Lightweight EP gear oil suitable for transmissions and transaxle units where the manufacturer specifies a GL-4 lubricant with SAE 75W-90 viscosity grade.
Valvoline Gear Oil 75W-90 provides excellent protection and perfect lubrication of the gearbox in a wide temperature range
Superior wear protection, even under heavy use. Advanced additives protect against corrosion, oxidation, foaming and deposits.
Synthetic base oils and a highly balanced additive system prevent breakdowns even after long use
Excellent viscosity-temperature properties even at very low temperatures. Highly stable viscosity with long-lasting multi-grade benefits
Better lubrication contributes to better fuel efficiency
Better oil circulation provides better cooling and therefore fuel savings
Suitable for manual transmissions and transaxle units of passenger cars, vans, trucks and buses where the manufacturer specifies a GL-4 transmission fluid with SAE 75W-90 viscosity grade
Applicable in very cold conditions
Specifications:
API: GL-4
Manufacturer's recommendation:
Lance
Ford
Chevrolet
Opel
Saab
Hyundai
KIA
Mazda
Mitsubishi
Nissan
Suzuki
Land Rover
Jaguar
Toyota
Container type: Canister
Contents: 20 litres
Fully synthetic multi-vehicle gear oil.
Lightweight EP gear oil suitable for transmissions and transaxle units where the manufacturer specifies a GL-4 lubricant with SAE 75W-90 viscosity grade.
Valvoline Gear Oil 75W-90 provides excellent protection and perfect lubrication of the gearbox over a wide temperature range.
Superior wear protection, even under heavy loads
Advanced additives protect against corrosion, oxidation,
development of foam and deposits.
Synthetic base oils and a highly balanced additive system
additive system prevent failures even after a long time
use
Excellent viscosity and temperature characteristics
even at very low temperatures. Highly stable viscosity
highly stable viscosity with long-lasting multi-grade benefits
Better lubrication helps improve fuel efficiency
Better oil circulation ensures better cooling and therefore fuel savings
Suitable for manual transmissions and transaxle units of passenger cars, vans, trucks and buses where the manufacturer specifies a GL-4 gear oil with SAE viscosity grade
and buses where the manufacturer specifies a GL-4 gear oil with SAE 75W-90 viscosity grade
Applicable in intense cold conditions
Specifications:
Valvoline also recommends this transmission fluid for use in vehicles where the following specifications are required:
API: GL-4
Lance
Ford
Chevrolet
Opel
Saab
Hyundai
KIA
Semi-synthetic premium transmission oil for passenger cars and other vehicles.
EP gear oil for differentials and transmissions for which manufacturers specify a GL-5 oil.
Valvoline Axle Oil 75W-90 provides excellent protection and lubrication of the differential and transaxle unit over a wide temperature range.
Superior wear protection, even under heavy loads
Unique additives protect against corrosion, oxidation, foaming and deposits.
The semi-synthetic base oils and the highly balanced additive system prevent breakdowns even after long use
Excellent viscosity-temperature properties even at very low temperatures. Highly stable viscosity with long-lasting multi-grade benefits
Better lubrication helps improve fuel efficiency. Better oil circulation ensures better cooling and therefore greater fuel economy.
Designed for limited-slip differentials and transaxle units in passenger cars, vans, and other vehicles where the manufacturer specifies a GL-5 transmission fluid with SAE 75W-90 viscosity grade
Specially formulated for the lubrication of hypoid transmissions operating at low and high speeds and with heavy or shock loads
Suitable for high-speed driving or long-distance travel
Specifications:
API GL-5
Container type: Can
Contents: 1 litre
Low consumption semi-synthetic oil for latest generation manual transmissions and hypoid gears - without limited slip. The very low cold viscosity ensures optimal gear lubrication even at extremely low temperatures. Increasingly used by vehicle manufacturers for comfortable shifting and to reduce fuel consumption.
SPECIFICATIONS / STANDARDS:
STANDARD: SAE 75W-80
API GL 4 and GL 5
SPECIAL BENEFITS:
- The very high pressure absorption capacity ensures optimal lubrication of the gearbox even at higher temperatures.
- Solves shifting problems at low temperatures.
- Reduces friction and prevents wear.
- Prevents corrosion and does not foam.
PROPERTY:
viscosity SAE J 306 75W-80
density at 20°C ASTM D 1298 0.878
viscosity at 40°C ASTM D 445 58.8 mm²/s
viscosity at 100°C ASTM D 445 10.1 mm²/s
Viscosity index ASTM D 2270 160
pour point ASTM D 97 -36°C
Flash point ASTM D 92 204°C